19
EN
Accessories
• The
wall
bracket
(
A
) is intended to save space when storing the device. The crevice
and brush nozzles, as well as the nozzle adapter, can be clipped into the semi-cir-
cular notches on the wall bracket.
• The
brush
nozzle
(
B
) is for vacuuming cushions and textiles, and for dusting fragile
objects such as picture frames, lampshades, keyboards, books, etc.
• The
crevice nozzle
(
H
) is for hard-to-reach places like corners, crevices and re-
cesses, such as cushions and cleaning inside cars.
• The
fl oor nozzle
(
I
) is for both carpets and smooth fl oors. The foot pedal can be
used to switch between carpet and smooth fl oor. A brush folds out on the underside
of the fl oor nozzle for smooth fl oors. The fl oor nozzle can only be used with the
telescopic tube.
• The
nozzle adapter
(
D
) is needed to attach the crevice and brush nozzles to the
device, or to attach the telescopic tube to the device.
• The
telescopic tube
(
G
) makes it easier to reach ceilings, corners, tops of cabinets,
and is suitable for fl oor cleaning when combined with the fl oor nozzle.
Assembly
Attach/remove telescopic tube on device
• The nozzle adapter (
D
) must fi rst be plugged into the suction opening (
10
) to attach
the telescopic tube (
G
). Then plug the telescopic tube into the nozzle adapter.
• To remove, unplug the telescopic tube from the nozzle adapter and pull it out of the
suction opening.
Adjust length of telescopic tube
1. Operate the slide on the telescopic tube (
G
) and adjust to the desired length.
2. Let go of the slide and move the tube a little bit further, until it clicks into place.
Attach/remove fl oor nozzle
• The fl oor nozzle (
I
) is plugged directly into the telescopic tube (
G
).
• To remove the fl oor nozzle, simply unplug it from the telescopic tube.
Attach/remove crevice and brush nozzle
The crevice (
H
) and brush (
B
) nozzles can be attached to either the device itself or the
telescopic tube (
G
).
Telescopic tube
• To attach the telescopic tube, simply plug in the desired nozzle.
• To remove the used nozzle, simply unplug it from the telescopic tube.
Device
• To attach the nozzles to the device, the nozzle adapter (
D
) must fi rst be plugged
into the suction opening (
10
). Then plug the desired nozzle into the nozzle adapter.
• To remove, unplug the used nozzle from the nozzle adapter and pull it out of the
suction opening.
03533_Inlay_DE-EN-FR-NL_A5_V2.indb 19
03533_Inlay_DE-EN-FR-NL_A5_V2.indb 19
26.07.2019 08:41:44
26.07.2019 08:41:44
