6
Filters
Fig . 4
Fig . 5
How to Change the Vacuum Bag
Fig . 2
Fig . 3
Fig . 1
Your vacuum cleaner is equipped with a secondary filter and either a post filter
or a HEPA filter . These filters capture fine dust particles and protect the motor
from dirt . It is important to replace the HEPA filter approximately once every six
months, or as needed .
To Change or Clean the Secondary Filter
1 . Unplug the vacuum cleaner . Remove the bag compartment cover and remove
the vacuum bag .
2 . Remove the secondary filter by sliding it out from under the bag supporter .
(Fig . 4)
3 . Shake or brush off the dirt from the filter and replace .
4 . Replace the vacuum bag and the bag compartment cover .
To Change the HEPA Filter or the Post Filter
1 . Unplug the vacuum cleaner . Remove the bag compartment cover .
2 . Remove the HEPA filter or the post filter from the front of the bag
compartment . (Fig . 5)
3 . Insert a new filter and replace the bag compartment cover .
Always operate the vacuum cleaner with a vacuum bag installed .
How to Change the Vacuum Bag
1 . Unplug the vacuum cleaner . Remove the bag compartment cover
and remove the used bag from the bag holder . (Fig .1)
2 . Attach the new vacuum bag onto the bag holder . (Fig . 2)
3 . Pull the bottom corners of the new vacuum bag . (Fig . 3)
4 . Reinsert the tabs on the end of the bag compartment cover into the
grooves on the bag compartment housing . Press it into place and
fasten the bag compartment tightly .