10
How to Replace the Vacuum Belt
Fig . 1
Fig . 2
Fig . 3
Fig . 4
CAUTION:
First, unplug the vacuum cleaner .
How to Remove the Bottom Plate
1 . Place vacuum cleaner in the low position (see page 7) .
Then, turn the vacuum cleaner over, exposing the underside .
2 . Remove the screws holding the lower plate in place . (Fig . 1)
3 . Now remove the bottom plate .
How to replace the belt
1 . Turn the unit over and remove the bottom plate as described above . (Fig . 1)
2 . Take out the agitator assembly and remove the belt . (Fig . 2)
3 . Loop the new belt around the agitator pulley and the motor drive shaft .
4 . Reinsert the agitator assembly back into housing . (Fig 3) Turn the agitator
assembly by hand, making sure the belt is not twisted and all rotating parts
move smoothly . (Fig . 4)
5 . Press the bottom plate into place and fasten it using the screws .
NOTE: To ensure maximum cleaning efficiency, the belt should be checked
regularly to be sure it is in good condition . Check to see if the belt is stretched,
cracked, or if excessive slipping is occurring . Replace if needed .
