21
Cleaning Side Brush
1.
Check if side brush is broken or something
is s
t
u
ck
2.
C
lean the side brush
3.
If side brush is curly or deform, put them in hot water for 5 second
s
4.
If side brush
is worn out
then
please
change
Cleaning Dust Bin and Filters
Empty and clean
the
dust bin
before or after every cleaning session. Follow the
cleaning steps as below.
Note:
a.
Wash the
primary
filter
after every cleaningsession, at least
15-30 days to
maximize its use life.
b.
Before install
ing
the
primary
filter make sure
is is
dry.
c.
HEPA filter should be
replaced
if
it has lost its shape or no longer fit tight
against the filter frame.
d. Recommended changing intervalls for the HEPA filter:
i. Once per month if the robot is vacuuming seven days a week
ii. Every other month if it is used 3-4 days per week
iii. Every four months if used less than once per week.
A. Hold the bottom of dust bin, and then press down the button
to take out the dust bin
B. Take out of dust bin
C. Open the dust bin
D.
Remove
the primary and HEPA filter
out and away from the
dust bin
.
E.
Empty the dust bin
F. Flush the dust bin and primary filter, use
a
cleaning
brush to clean
the
HEPA-filter
, do not use water
.
G. Install the
dried
primary filter
and
HEPA-filter back into dust bin
New filters can be bought at www.cleanmate.se or at your local retailer.
