13
Battery Charging
1. Battery Charging
Place charging station against the wall, and remove
obstacles about 1m at two sides and 2m in front of the
station as show in the right figure.
Note:
If
the
robot is powered off, then switch on the robot
first before charging.
2.
Charge the robot in either way as shown below:
A.
Plug one end of the adapter into the robot and the other end into the power socket as shown
in Fig a.
B.
Press “HOME” button on remote control or robot to
make
the robot
search
for the
charging
station and
dock automatically as shown in Fig b
Note:
A.
When
the
robot is charging,
the
LED panel will gradually show “1111” from left to right.
B.
When charging is
done
, LED panel will show “FULL”
C.
In standby status, the robot will broadcast voice “Please Charge” when battery level is low.
D.
In working status, the robot will
start searching for the
charging
station
automatically when
battery level
is low.
Figur A
Figur B
