15
Schedule
1. Make schedule setting by LED display on robot body
A. robot system time setting (make sure the robot in Standby or Power on
status)
a. Press “PLAN” on robot body to enter robot system setting, LED display will show
current time set.
b. the left two number on LED panel will flash. Press “HOME” on robot to increase hour
number one by one till the number you want to set. When you keep press “HOME” on
robot, the number will continuous increase automatically till you release it.
c. Press to confirm the hour number setting and enter into minute setting, right side two
number will flashing, press “HOME” to increase the number till you get the number want
to set. If you keep press “HOME” on robot, the number will continuous increase
automatically till you release it.
d. Press to save the setting, and press “PLAN” to quit the setting. (If you not press
to save the setting but press “PLAN” directly to quit the setting, it will quit without save
the setting).
You can schedule the robot to make it start cleaning automatically at a certain time every day.
B. Schedule Time Setting (make sure the robot in Standby or Power On status)
a. Keep press “PLAN” over 5 second to enter robot schedule setting, the left two number on
LED display panel will flashing.
b. Press “HOME” on robot to increase the number till you find the one you want to set.
c. Press to confirm the hour setting and enter minutes setting, right side two number will
flashing, press “HOME” to increase the number till you find the one want to set. Please
note: when you keep pressing “HOME”, the number will increase continues automatically
till you release it.
d. Press to save previous step setting, then press “PLAN” to quit schedule setting.
(If you not save the setting before you press “PLAN” to quit schedule setting, robot would
not save this data setting)
