- PREPARATION -
Insert the membrane tank
Position the fresh water membrane tank (A1) in the dirty water tank (A2). The support brackets on the
membrane tank are fastened to the dirty water tank as shown in the illustration (B3).
- Fill the fresh water tank -
Fill the membrane tank (A) approx. half-way with fresh water. Add the cleaning agent* (B) and then fill the
membrane tank completely to approx. 2cm below the rim (C). Before closing, make sure that the water filter
is at the lowest point of the tank and that the lid is resting tightly on the housing (D).
*We recommend only using the original cleaning agent from the manufacturer. Unsuitable cleaning agents
can lead to the water lines becoming clogged up or to other damage.
Close the fresh water tank
Insert the suction hose in the membrane tank. Make sure that the filter (A1) is dirt-free and position it at
the lowest point in the tank.
Put the lid on (C) and connect the water hose to the nipple. (D)
The Robo 40 is now ready to operate
A
B
C
D
B
1
3
2
1
A
C
D
B
1
A
C
D
B
falsch
