![CleanCraft KM 625 Operating Instructions Manual Download Page 8](http://html1.mh-extra.com/html/cleancraft/km-625/km-625_operating-instructions-manual_2620163008.webp)
8
KM Series | 1.02
Scope of Delivery
6
Scope of Delivery
Scope of delivery KM 625 and KM 825
- Battery 12V 42Ah AGM
"You can receive the safety data sheet from your spe-
cialist dealer or by calling Tel: +49 (0)951/96555-0"
- On-board charger 12V 5Ah
- Side broom
- Main sweeping roller
- Plate filter
7
Optional Accessories
KM 625
- Main sweeper roller soft
item number: 7310000
- Main sweeper roller medium
item number: 7310001
- Main sweeper roller hard
item number: 7310002
- Side broom
item number: 7310010
- Plate filter
item number: 7310015
- Polyester plate filter
item number: 7310016
- AGM battery 12V 42 Ah
item number: 7310020
KM 825
- Main sweeper roller soft
item number: 7310005
- Main sweeper roller medium
item number: 7310006
- Seitenbesen
item number: 7310010
- Plate filter
item number: 7310015
- Polyester plate filter
item number: 7310016
- AGM battery 12V 42 Ah
item number: 7310020
8
Transport, Packaging, Sto-
rage
Transport
Improper transport of individual devices, unsecured de-
vices stacked on top of each other or next to each other
in packed or already unpacked condition is accident-
prone and can cause damage or malfunctions for which
we do not grant any liability or guarantee.
Transport the scope of delivery secured against shifting
or tilting with a sufficiently dimensioned industrial truck to
the installation site.
General risks during internal transport
Devices may only be transported by authorized and qua-
lified persons. Act responsibly during transport and al-
ways consider the consequences. Refrain from daring
and risky actions.
Gradients and descents (e.g. driveways, ramps and the
like) are particularly dangerous. If such passages are
unavoidable, special caution is required.
Before starting the transport check the transport route for
possible danger points, unevenness and disturbances
as well as for sufficient strength and load capacity.
Danger points, unevenness and disturbance points must
be inspected before transport. The removal of danger
spots, disturbances and unevenness at the time of trans-
port by other employees leads to considerable dangers.
Careful planning of internal transport is therefore essen-
tial.
CAUTION!
Injuries caused by parts falling over or off a forklift,
pallet truck or transport vehicle.
Only use means of transport that can carry the total
weight and are suitable for it.
CAUTION: DANGER OF TIPPING!
The device may be lifted unsecured by a maximum
of 2cm.
Employees must be outside the danger zone, the
reach of loads. Warn employees and, if necessary,
advise employees of the hazard.
Summary of Contents for KM 625
