CleanCraft KM 625, Operating Instructions Manual

Page: 12 / 26

12 KM Series | 1.02
Operation
12 Operation
Step 1: Switch on the unit by pressing the ON/OFF button.
Step 2: Check that the green LED is lit and that the bat-
tery is charged.
Step 3: Select the appropriate operating mode:
- On / Off switch 1 for light soiling and smooth floors.
- On / Off switch 2 for heavy dirt, cement, smooth as-
phalt or carpeted floors.
12.1Adjusting the side brush
Depending on the application and wear, the side brush can
be adjusted by using the adjustment screw (Fig. 10). Re-
move the top cover and turn the adjustment screw clock-
wise to increase the distance to the ground. Turn the adju-
stment screw anticlockwise to decrease the distance.
Fig. 10: Side brush adjustment
13 Care, Maintenance and Repair
13.1Care by cleaning
The sweeper must always be kept in a clean condition.
- Clean the sweeper only with a dry or damp cloth. Do
not use aggressive chemicals or scouring agents for
cleaning.
- Remove foreign objects such as leaves, twigs, etc.
from the brushes.
- Do not wash the brushes with hot water.
- Regularly check the drive belts for correct fit and ten-
sion.
- Store the sweeper indoors in a dry place protected
from dust, dirt and extreme temperatures.
- Keep metal parts dry to avoid or minimise corrosion.
- Avoid sweeping in long strings or ropes, as the brus-
hes can become tangled and damaged. If a rope or
thread becomes tangled, please remove the rever-
sing roller.
13.1.1 Emptying the dirt collection container
Before removing the dirt collection container, make sure
that the machine is switched off.
Step 1: Unlock the locking clamp of the dirt collection con-
tainer.
Step 2: Pull the handle to remove the container.
Step 3: Empty the container.
Step 4: Clean the dirt collection container and put it back
into the sweeper.
Step 5: Tighten the locking clamp of the dirt collection
container.
ATTENTION!
The machine must only be used by authorised per-
sonnel. Do not leave the machine unattended when it
is switched on.
ATTENTION!
Empty the dirt collection container regularly to ensure
safe work operation.
CAUTION!
Do not use the sweeper in wet areas!
NOTE!
When using operation mode 2, the battery working
time of the machine is reduced.
Wear protective gloves
Wear suitable protective gloves for cleaning to pro-
tect against injury.
ATTENTION!
Clean all parts of the sweeper when you finished
working with the machine. Empty the container and
wipe it with a cloth.
ATTENTION!
Never use the sweeper without dirt collection container.