[B]
[C]
6
GETTING STARTED
1 . Remove all packing material .
2 . Remove and save literature .
3 . Unpack mounting washers, screws and spacers for mounting and set them aside in a safe
place where they will not roll away or get lost .
IMPORTANT
: Do not attempt to operate appliance until it is properly installed. This appli-
ance will be damaged if operated while sitting on a surface or on its side.
CHOOSE A LOCATION
When choosing your location, consider the following:
•
DO
make sure to mount within reach of an electrical outlet .
•
DO
consider your normal work patterns in the kitchen when choosing location . As
this will become your most used kitchen appliance, it is recommended to mount the
CLEANCut™ close to your sink or food prep area .
•
DO NOT
mount over any heating or cooking appliance such as your range or oven .
•
DO NOT
mount under, in front of or behind any under-cabinet light fi xtures .
CAUTION
: When selecting a location for your CLEANCut™, make sure you have
adequate room to reach the power jack. Be sure to unlatch the main body to ensure that
nothing hits the power jack.
CAUTION
: There needs to be a minimum of 13-1/4” of space between the surface that the
CLEANCut™ is mounted to and the counter top.
DETERMINE CABINET TYPE
Prior to taping the mounting template and beginning to drill your holes, determine if your
cabinet has a fl at bottom
[B]
or an overhanging lip
[C]
. If your cabinet is fl at, follow STANDARD
INSTALLATION
; if the cabinet has a lip, refer to SPACER MOUNTING INSTALLATION.
