PROBLEM
POSSIBLE CAUSE
SOLUTION
CLEANCut™ does not
dispense paper
Paper does not load
12
TROUBLESHOOTING
Power adapter is not
plugged into the wall
Power cord connector is not
plugged into the power jack
Main body is open
Power cord is hitting roll
Make sure the power adapter
is plugged into a live outlet
Fully press power cord
connector into the power jack
Close the main body and
make sure the opening
latch is fully locked
Use cord management
hooks to keep power cord
from hitting the paper roll
First sheet is either curled
or damaged
Paper path is clogged
Tear off the first sheet to
make sure its flat
Make sure the main body
is fully open and clear any
loose paper
Cutter is blocking the path
Unplug and replug the power
cord connector to reset cutter
Main body is not fully open
Push the main body
completely down to fully open
Paper is jammed
Unplug the power cord
connector then remove
any jammed paper . Replug
power cord connector
