Clean Air Edwardian Large, Operating & Installation Instructions Manual

Page: 6 / 18

FAN OPERATION
During normal operation of the wood
heater, the fan should generally be on
first or second speed. Third speed is a
boost and is used only with a very hot
fire.
When first lighting a fire, leave the fan
off for 30 to 40 minutes to allow the fire
to establish. Switch the fan off when
the heater is shut down for low burn.
DOOR GLASS
Clean Air use the best neo ceramics
glass available. Please treat with
care. Do not slam the door on logs.
Generally any creosote build up on
the glass will burn off on the next high
fire. It may be cleaned with good
quality detergent, but don’t leave
residue on the glass as this will bake
on.
If you break or crack your glass,
replace it immediately. Your Clean Air
dealer will be able to do this for you.
Your glass is not covered by warranty.
DOOR SEAL
The door seal is a glass fibre and will
compress over time. If it becomes
damaged or broken, it should be
replaced for the best performance
and safety of your heater.
DOOR CATCH ADJUSTMENT
When the door handle becomes
loose or when the door seal has
compressed in, the door catch will
need to be adjusted.
Simply open the door and loosen the
nuts on inside of firebox. Push the
catch back and re-tighten the nuts.
Undo nuts
on inside
of firebox
Push back
catch and
retighten
Page 6