ENGLISH
20
• Press
the / BACK
button.
The device changes to
the “steam” mode.
Caution: Hot steam
may be expelled
from the machine.
• After a few seconds
the water is heated
up. The
/ BACK
button lights up.
• Place the cup or a heat-resistant glass under the hot
water/steam nozzle (14).
• Turn the hot water/steam switch (9) carefully in an
anticlockwise direction.
The further you turn the switch away from the OFF posi-
tion in an anticlockwise direction, the greater the quantity
of steam that is expelled.
• After the heating process turn the hot water/steam
switch back to the OFF position.
In order to be able to make coffee again you must turn
the machine back to the normal mode.
• Press
the
MENU/OK/MEMORY button or the
/
BACK button.
The MENU/OK/MEMORY and
/ BACK buttons fl ash
of the same time. When the MENU/OK/MEMORY but-
ton is fl ashing you can make some coffee.
Programming Presets
If you would like to program presets you must change
to the programming mode. You can set the following
presets, fi lling quantity, pre-injection, percolation time
and percolation temperature.
There are two ways to select the following menu item
and change the presets:
One-Time Preset:
If you want to change the presets only for the next per-
colation process, but do not wish to store them, please
proceed as follows:
• Keep
the
MENU/OK/
MEMORY button
pressed down for
fi ve seconds. In the
display the “normal
cup” and “M” fl ash.
The arrowheads are
no longer visible.
Note: By pressing the
/ BACK button once you
reach the programming mode of the presets for the
“large cup” (the symbols “large cup” and “M” fl ash in
the display). Leave the menu by pressing the MENU/
OK/MEMORY button repeatedly.
The machine switches back automatically to normal
mode if no button is pressed for 10 seconds. Any chan-
ges you have made will not be stored.
• Now press the MENU/OK/MEMORY button for fi ve
seconds to reach the programming mode. Repeated
pressing of the MENU/OK/MEMORY button will take
to the individual presets. After you have made your
adjustments you can leave the menu by pressing the
/ BACK button twice. The individual menu items
for the one-time and for the programmed preset are
explained in the section below.
Programming Presets:
If you want to store the changed presets please use the
MENU/OK/MEMORY button. Repeated pressing of the
MENU/OK/MEMORY button will take to the next setting
option. Store the changes with the MENU/OK/MEMORY
button.
Filling Quantity - Normal Cup
• Place a cup under the
coffee spout (13).
• Go to the menu item
„normal cup“.
• Start percolation with
the START button.
• Start the percolation process with the
button
when you have reached the desired fi lling quantity.
Store the changes with the MENU/OK/MEMORY
below.
The maximum fi lling quantity for the normal cup is 100
ml. The preset is a fi lling quantity of 40 ml when the
stored or one-time selected setting is used.
Filling Quantity - Large Cup
• Place a cup under the
coffee spout (13).
• Go to the menu item
„normal cup“.
• Press
the / BACK
button.
• Start the percolation
process with the
START button.
• Stop the percolation process with the
button
when the desired fi lling quantity has been reached.
Store the changes with the MENU/OK/MEMORY
button.
The maximum fi lling quantity for the large cup is 200 ml.
The preset fi lling quantity is 100 ml when the saved or
the one-time selected setting is used.
05-KAV 2936 GB 20 03.12.2004, 12:13:25 Uhr
