Clatronic BS 1248, Instruction Manual

Page: 35 / 54

EN
GLISH
35
Technical Data
Model: ..............................................................................BS 1248
Power supply: ............................................................230 V, 50 Hz
Power consumption:
P
nom.
: ............................................................................1200 W
P
max.
: ............................................................................2000 W
Protection class: ..........................................................................
ΙΙ
Net weight: ........................................................................4,70 kg
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of reutilisa-
tion of electrical and electronic equipment.
Information concerning where the equipment can be disposed of
can be obtained from your local authority.
Outlet filter (13)
The appliance is also equipped
with an outlet filter. In order
to ensure that the filter works
correctly, we recommend that you
replace it every six months. It is
located on the rear part of your
appliance behind a ventilation
grid. Open the ventilation grille
by pressing the lever on its side.
Then pull the grille out towards
the front. Remove the filter and
clean as described above. Fit the
filter back into place and close
the ventilation grid by following
the steps above in the opposite
order.

IMPORTANT NOTE!
• Cleaning may become necessary after a shorter time,
depending on the conditions of use, e.g. when vacuuming
fine dust.
• If the suction power of your vacuum cleaner diminishes
please clean the filters as described.
• If the suction power suddenly diminishes during operation
this may be due to the filters being locked.
Cleaning and storage
WARNING:
• Before cleaning remove the mains lead from the socket.
• Under no circumstances should you immerse the device
in water for cleaning purposes. Otherwise this might result
in an electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Cleaning
• Clean the casing with a dry cloth.
• Clean the motor protection filter approximately every 10.
time the vacuum cleaner is emptied. Clean the filter in hot
water without additives. Put it back into place only once it is
completely dry.
Storage
• Let the iron cool down completely.
• Wind the cable completely.
• Insert the hook of the nozzle on the back of the device into
the parking aid (14).
• If you position the device horizontally: Please insert the hook
of the floor nozzle into the parking assistant on the rear of
the device.
• If you position the device vertically: Please insert the hook of
the suction tube into the parking assistant on the bottom of
the device.
05-BS 1248 Neu.indd 35 25.03.2010 8:59:51 Uhr