background image

IMPORTANT MESSAGE

Thank you for purchasing this Classen product.  You have purchased a world class product, one of the best 

designed and built anywhere.  

This product comes with Parts and Operator's Manuals. The useful life and good service you receive from this 

product depends to a large extent on how well you read and understand this manual.  Treat this product properly 

and adjust it as instructed, and it will give you many years of reliable service.

See a Classen dealer for any service or parts needed.  Classen service ensures that you continue to receive  

the best results possible from Classen products.  You can trust Classen replacement parts because they are 

manufactured with the same high precision and quality as the original parts.  

Classen designs and builds its equipment to serve many years in a safe and productive manner.  For longest life, 

use this product only as directed in the manual, keep it in good repair and follow safety warnings and instruc-

tions.  You'll always be glad you did.

 

Classen

1028 Street  Road

Southampton, PA 18966

TABLE OF CONTENTS 

FIGURES 

PAGE

SAFETY .........................................................................................................................................................4-7

LABELS ............................................................................................................................................................8

CONTROLS ......................................................................................................................................................9

OPERATION ..............................................................................................................................................10-11

SHAFT ASSEMBLIES ...............................................................................................................................12-13

MAINTENANCE / STORAGE ....................................................................................................................14-15

WARRANTY ............................................................................................................................... BACK COVER

3

TURF RAKE

Summary of Contents for TRS-20H

















Reviews: