Engage
Disengage
OPERATION
WARNING
Transporting Rake
1. Position height adjustment lever to the start/trans-
port position. (Figure 1)
2. Start motor, run motor at one half throttle.
3. Engage top bail.
4. Select speed lever.
5. Lift bottom bail to engage the main shaft. (Figure 2)
6. Release bail to stop.
Operating Rake
1. Put speed lever in neutral position.
2. Start engine.
3. Engage top bail.
4. Select forward or reverse with the speed lever.
5. Drive rake to the area to be raked.
6. Move height adjustment lever to the appropriate
setting for the shaft assembly being used. (See
Shaft Assemblies section)
7. Lift bottom bail to engage the main shaft. (Figure 2)
8. Release bail to stop.
Stopping Engine
1. Release bail.
2. Turn off ignition switch.
!
FIGURE 1
FIGURE 2
11
TURF RAKE
