AC 5247
READER DEFAULT CODE OBDII
•
Status Beep Set
This function allows you to turn on/off the build-in speaker for the LEDs in diagnostic testing.
Diff erent audio tone corresponds to diff erent LED lamp. This function is invaluable when
working in bright areas where LED illumination alone is not suffi
cient.
1 - From System Setup screen, use the SCROLL button to select Status Beep Set and press
the ENTER button.
2 - From Status Beep Set menu, use the SCROLL button to select Beep ON or Beep OFF to
turn on/off the beep.
3 - Press the ENTER button to save your selection and return to previous menu.
•
Fn Key Set
From System Setup screen, use the SCROLL button to select FN Key Set, and press the
ENTER button.
In this menu, you could confi gure the FN setting for one-click function. During the operation
in any menu or interface of the tool, once press the FN key, it will come up the setting menu.
that is One- Quick-Click function.
Use the SCROLL button to select Usual DataStream Mode, All DataStream Mode, I/M
Readiness Mode, Read Codes Mode. Then press the ENTER button to save your selection
and return to previous screen.
1 - Usual DataStream Mode
In this Mode, the tool has recommended some data stream as important data steam for the
user reference, during the vehicle’s monitors have run and completed their diagnosis and
testing.
