English
GREAT BRITAIN •
customer service
tel:
020 8247 9300
internet
www.clasohlson.co.uk
postal
10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Ver
. 20180404
Digital
Cooking Thermometer
Art.no 34-2149 Model WDJ7001-A
Please read the entire instruction manual before use and then
save it for future reference. We reserve the right for any errors
in text or images and any necessary changes made to techni-
cal data. In the event of technical problems or other queries,
please contact our Customer Services.
Safety
Important
• The thermometer must not be used in the oven or
microwave.
• Take out the food, bread, etc. from the oven before you
measure the temperature.
• The thermometer is not dishwasher safe.
Inserting batteries
Instructions for use
Responsible disposal
This symbol indicates that this product should not
be disposed of with general household waste.
This applies throughout the entire EU. In order to
prevent any harm to the environment or health
hazards caused by incorrect waste disposal,
the product must be handed in for recycling
so that the material can be disposed of in
a responsible manner. When recycling the product,
take it to your local collection facility or contact
the place of purchase. They will ensure that
the product is disposed of in an environmentally
sound manner.
1. Unscrew the battery cover.
2. Insert the batteries (included).
Note:
Make sure that they are inserted with the correct
polarity, the positive poles (+) should be turned up towards
the cover.
3. Screw on the cover.
1. Remove the protective cover from the probe.
2. Press [
/HOLD ] to switch the thermometer on.
3. Press [ ºC/ºF ] if you want to switch between ºC and ºF display.
4. Press [
/HOLD ] to switch the thermometer off.
5. Refit the protective cover on the probe.
Information
• Insert the probe at least 2 cm into the food you wish
to measure the temperature of and keep it there until
the measurement on the display has stabilized (approx.
4–10 seconds).
• Press [
/HOLD ] if you want to lock the measurement
on the display while the temperature is being measured.
Press again to return to normal measurement.
• The thermometer automatically switches off after
20 minutes approximately.
• The display backlight automatically switches off after
approx. 15 seconds.
Care and maintenance
• Clean the product, especially the probe, with a soft, damp
cloth after using it. Use only mild cleaning agents, never
solvents or corrosive chemicals.
• The batteries should be replaced when the digits on display
screen start to fade.
Specifications
Batteries
3 × LR44/SR44 (included)
Temperature Range
−45 to 200 ºC (−49 to 392 ºF)
Accuracy
−45 to −20 ºC: ± 2 ºC
−20 to 150 °C: ± 1 ºC
150 to 200 °C: ± 2 ºC
