12
English
5.4 Delete (erasing a photo/video sequence)
1. Move the function selector to
SETUP
mode.
2. Press [
I►
] (12) once to launch playback.
3. Use [
▲
][
▼
] to toggle between the saved files. Still files have an arrow symbol in
the top left corner and video files have a blue film strip symbol.
4. Press [ DEL ] to delete the image/video sequence displayed.
5. “Del One” (delete one image) appears on the display.
Warning:
If you press [
►
] or [
◄
] again and select
Del All
and continue, all files on
the memory card will be deleted.
6. Press [ OK ] to confirm deletion.
7. Select
Yes
to continue or
No
to discontinue, using [
►
] or [
◄
]. Press [ OK ].
8. If you select
Yes
and press [ OK ], the file will be deleted.
5.5 Default Set (restores manufacturer’s settings)
Restoration of manufacturer’s settings involves deleting all personal settings and
returning to the manufacturer’s settings.
Press [ OK ] to confirm restoration of manufacturer’s settings (or [ MENU ] to
discontinue).
6. Positioning/attaching the camera
• The camera can be attached to e.g. a tree using the strap. Secure the camera in
a stable position so that it will not move due to the wind or vibrations. Remember
to position the camera to give it the best possible protection from the elements.
A suitable distance to the subject is approximately 5 metres; secure the camera
approximately 1.5 to 2 metres above the ground.
• The camera can be attached to a camera tripod/bracket with a 1/4
″
tripod thread.
Note!
• The camera is affected by temperature. The capacity and range of the PIR
sensor is affected by the ambient temperature relative to the animal’s body heat.
The greater the difference, the easier it is for the camera to capture the target over
a longer distance.
• The camera produces colour images in daylight and black and white ones in darkness.
• Remember where the sun rises and sets, and position the camera with the sun
behind it. This will prevent direct light spoiling your photos.
• If possible, position the camera in a northerly direction to prevent direct light
spoiling your photos and false indications from the PIR sensor.
• Remove twigs in front of the camera; twigs with leaves on them can cause
false indications.
• Always take test photos to test the correct setting and positioning of the camera.
Note:
Remember to set the switch to the
ON
setting before closing the camera and
going home.
