4
English
1
2
3
Buttons and functions
1.
HEAT MOTOR
Bowl heater and rotating
fountain-head screw
2.
OFF
3.
HEAT
Bowl heater only
Before initial use
1. Wipe the bowl clean with a soft damp cloth.
2. Clean the screw and tower using some warm water mixed with a little
washing-up liquid.
3. Rinse, and dry all parts thoroughly.
Installation
1. Attach the screw to the centre pin.
2. Place the tower over the screw and line up the three fountain-head holes with
the three holes in the tower.
3. Plug the product into a power point. Turn the selector dial to
HEAT MOTOR
.
Check that the screw rotates and the bowl begins to heat up. Once this action is
successful, turn the dial back to
OFF
.
Operating instructions
1. Place the product on a level surface and plug it into a power point. Make sure
the dial switch is set to the
OFF
position.
2. Melt some chocolate in the microwave oven or in water bath (Bain-marie) on
the cooker.
3. Turn the selector dial to the
HEAT
position, making sure that the indicator light is
also on. It is important to allow the bowl a few minutes to come up to operating
temperature before pouring in the chocolate.