6
E
N
G
LI
S
H
4. Mounting & Installation
1. Mounting the aerial
Attach the supplied aerial to the bracket on top of the camera. The aerial can be
angled for the best possible reception. The best reception is obtained with the aerial
angled vertically.
2. Mounting the camera
Mount the camera on the included table stand. The table stand can also be ceiling
or wall mounted.
3. Connecting the network cable
Use a standard network cable for the
LAN
connection to connect the camera
to your network switch or router.
N.B.
You must first connect the camera with the network lead in order to
configure the camera for the wireless network. You can remove the network
lead after configuration.
4. Switching on the camera
Connect the supplied power adaptor to the outlet marked
POWER
. The camera
starts up automatically. Use only the included or recommended adaptor.
5. LED Indicators
• POWER
- At start-up the indicator is lit for a short while before it begins
flashing for 15-20 seconds. The indicator then remains lit.
• ACTIVE
- Lights only when video is transmitted in real time to one or
several users.
• NETWORK
- Lights when the camera is connected to the network.