EN
G
LI
SH
4.
1. Insert the 19 mm round end plugs (36) into both ends of the foam pad rollers (10&11).
2. Insert the short pad rollers (10 & 11) through the holes in the leg developer tube (7) as in the diagram and
then fit the foam pads (31) onto the rollers (10 & 11).
3. Attach the long weight bar (12) to the leg developer tube (7). Secure the weight bar using bolt (19),
washer (28) and lock nut (30). Fit the rubber spacer (34) and the round end plug (35) onto the long weight
bar (12). Fit the plastic stopper (33) and then the round end plug (35) and the quick clip (32) onto the
weight bar.
4. Insert the longer foam pad roller (10) through the height adjuster tube (6). Fit the foam pads to hold the
pad rollers in place.
5. Set the height adjuster (6) to the desired height on the front support leg using the locking pin (18).
6. Attach the leg developer part (7) to the height adjuster (6) using bolt (21), washer (27) and lock nut (29).
5.
1. Insert 19 mm round end plugs (36) into the backrest’s tie-bar (15) and then push the tie-bar in at the
desired height as in the diagram.
Summary of Contents for HB-300B
