7
E
n
g
li
s
h
7. Place a slide or negative in the holder and close it.
Instructions: Push up the tab with the white arrow on the side of the film holder,
open the film holder and position the film so that the perforations line up with the
guides in the film holder. Close the film holder all round. Make sure you mount the
pictures the right way round. Although the software lets you rotate images, it does
not let you create a mirror image of a back-to-front slide.
8. Insert the holder into the scanner from the right. The side with a forward arrow and
a cut-off corner must be inserted first.
9. Now you can start scanning the pictures in the film holder.
10. Click
Acquire
in the bottom right-hand corner of the Acquire from Scanner window.
11. A preview image appears in the large window, Check that the image is the right
way round and looks good. Click
Capture
or press the [COPY] button on the
scanner. (COPY only works when the image is displayed in this mode.) A progress
indicator is shown while the image is being saved. Allow saving of the image to
complete before you move the film holder.
12. The image will be saved to the folder you specified at
Save to this location
.
The image is saved with the file name: today’s date and a serial number,
eg 2011-02-06_42.JPG.
13. Move the film holder to display the next image and continue scanning.
14. To stop scanning and edit saved images, click
Close
.
