7
English
6
5. Charging
Note:
The mains adaptor is designed for indoor use only.
1. Press in the battery latch on
the battery and pull it forward out
from the power tool.
3. Place the charger on the battery
and press it home.
The red LED lights up when the battery is correctly installed and is being charged.
Allow the battery to charge for about 3–5 hours, then remove it from the charger.
When charging is complete, unplug the mains adaptor.
Note:
The charger does not switch off automatically.
6. Description of operation
Forward/reverse action
• To change the direction of rotation: Release the trigger switch and allow the chuck
to stop rotating. To change the direction of rotation, press the forward/reverse
selector in the required direction:
- Press in the selector on the left-hand side for anticlockwise rotation
Q
.
- Press in the selector on the right-hand side for clockwise rotation
P
.
• Move the selector to the midway position to prevent accidental starting of
the power tool when you are not using it.
Keyless chuck
• The power tool has a rapid-action keyless chuck.
• Hold the rear ring of the chuck with one hand and turn the front part with
the other hand to grip or release the accessory (drill bit, etc.).
2. Connect the mains adaptor to a wall socket and connect the lead to the charger.
The green LED lights up, indicating that the mains adaptor
is connected.
