background image

3

English

e)  When operating a power tool outdoors, use an extension lead suitable for outdoor use. 

Using an extension lead suitable for outdoor use reduces the risk of electric shock.

f)  If you need to use a power tool in a humid location, connect the tool to the power 

supply via a residual current device (RCD). Using an RCD reduces the risk of 
electric shock.

3)  Personal safety

a)  Stay alert and use common sense when using a power tool. Do not use a power 

tool if you are tired or under the influence of drugs, alcohol or medication.  
A moment of inattention when using a power tool may result in serious injury.

b)  Use safety equipment. Always wear safety glasses. Using safety equipment such 

as a dust mask, non-slip safety shoes, a hard hat and ear protectors reduces 
the risk of injury.

c)  Avoid starting the tool accidentally. Make sure that the switch is in the OFF position 

before you plug the tool in. You could cause an accident if you carry a power tool 
with your finger on the trigger switch or connect a power tool to the power supply 
when the switch is at ON.

d)  Remove all service tools/keys before you switch on the power tool.  

A service tool left attached to a rotating part of the power tool may result in injury.

e)  Do not overreach. Keep proper footing and balance at all times. This allows you to 

have better control of the power tool in unexpected situations.

f)  Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your hair, 

clothing and gloves away from moving parts. Loosely-fitting clothes, jewellery or 
long hair may get trapped in moving parts.

g)  If dust extraction and collection equipment is available, make sure it is connected 

and properly used. Using such equipment can reduce dust-related hazards.

4)  Using and maintaining the power tool

a)  Do not overload the power tool. Use the correct power tool for the work you are 

doing. The correct power tool will do the job better and more safely at the rate for 
which it was designed.

b)  Do not use the power tool if the switch does not turn it on and off. A power tool 

that cannot be controlled with the switch is dangerous and must be repaired.

c)  Unplug the power tool before you make any adjustments, change an accessory or 

put the tool away. These preventive safety measures will reduce the risk of the tool 
being started accidentally.

d)  Store idle power tools out of the reach of children and do not allow people 

unfamiliar with the power tool and these instructions to use it. Power tools are 
dangerous in the hands of inexperienced users.

e)  Check for misalignment or binding of moving parts, for broken parts or anything 

else that may affect the operation of the power tool. If there is any damage it must 
be repaired before the tool can be used again. Many accidents are caused by 
poorly maintained power tools.

f)  Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp 

edges are less likely to bind and are easier to control.

Summary of Contents for DJC123-120













































Reviews: