5
English
12
Indicator
Pull the pull-cord (12) to turn on the heater.
Continue pulling to change heat settings and
to turn off the heater.
O
– Off
L
– Low
M
– Medium
H
– High
Operating instructions
1. Plug the mains lead into a wall socket.
2. Adjust the height by loosening the lock ring (3).
Position the heater to the desired height and
re-tighten.
3. Use the pull-cord to start the heater and for
selecting the desired heat setting.
4. Adjust the angle of the heater to
the desired position.
NOTE:
The heater might make a clicking noise when
it is warming up/cooling down. This is caused by
the metal expanding/contracting and is quite normal.
Specifications
Protection class
IP24
Power supply
220–240 V AC, 50 Hz
Wattage
1700–2000 W
