4
English
7
8
9
10
10
10
11
6
5
4
2
3
1
11
11
Product description
1. Infrared Heater
2. Heater stem
3. Lock ring
4. Upper stand section
5. Middle stand section
6. Lower stand section
7. Base
8. Washer
9. Base screw
10. Screw
11. Mains lead holders with retaining screws.
The heater is equipped with an electronic tip-over switch,
which turns off the heater when tipped.
Assembly
1. Place the lower stand section (6) into the base (7).
Fit the washer (8) into the centre of the underside of
the base and tighten it in place with the supplied
base screw (9).
2. Fit the middle stand section (5) to the lower stand
section (6) and fasten them together with a screw (10).
3. Insert the heater stem (2) into the upper stand section
(4). Fasten the sections together with the lock ring (3)
and turning it clockwise to tighten.
4. Fit the upper stand section (4) with the middle section (5).
Fasten them together using a screw (10).
5. Fit the heater (1) onto its stem (2). Tighten the sections
together using a screw (10).
6. Screw the mains lead holders into place.
7. Push the mains lead securely into the clip holders (11).
