Clas Ohlson 44-4412, Manual

Page: 7 / 48

7
English
Settings
1. Connect the mains lead to an earthed wall socket.
2. Press [
] to switch the air fryer on. The default factory settings are 180 °C for
the temperature and 15 minutes for the timer.
3. If you wish to change the cooking temperature, press [ ]. The temperature
display will flash. Press or hold in [ + ] or [ – ] to change the temperature.
4. If you wish to change the timer setting, press [ ]. The time display will flash.
Press or hold in [ + ] or [ – ] to change the cooking time.
5. Press [
►
ll ] to start the cooking process.
6. Press [ ► ll ] once again to stop cooking before the set cooking time has elapsed.
• When the [ ► ll ] button has been pressed while cooking is in progress, the cooking
process will be interrupted and the temperature and timer settings can be changed.
• Pressing the on/off button [ ] will switch the air fryer off (into standby mode).
To completely disconnect the product from the power it needs to be unplugged
or switched off at the wall socket using a two-pole switch.
Before initial use
• Remove all packaging.
• Wash the pan and basket thoroughly before use. Use only mild cleaning agents,
never solvents or corrosive chemicals.
• Rinse the pan and basket thoroughly and make sure that they are completely
dry before use.
Instructions for use
1. Remove the pan from the air fryer.
2. Place the food into the basket. Never
fill the basket to a level above the
MAX mark.
3. Place the basket into the pan and
push it down until it clicks into place.
Slide the pan with the basket inside
into the air fryer, making sure that it
is inserted all the way. Never use the
pan without the basket.