4
5
English
1. [
▼
] Reduce the value/volume, search for the previous
radio channel
2. [ VOL ] Set the volume
3. [ RADIO/SLEEP ] Switch the radio on
4. [
] Switch the radio off, snooze-function,
change the display brightness
5. [ SET ] Press to view set alarm times, advance through
saved radio channels. Hold in to set the time
6. [ AL1
∙
2 ] Activate the alarm, set the time of alarms 1 and 2
7. [
▲
/Project ] Increase the value/volume, search for
the next radio channel, activate the projector
8. Projector
9. Display
10.
:Alarm 1 is activated
11.
:Alarm 2 is activated
12.
: Snooze
13.
Radio: The radio is switched on
14.
SLEEP: The sleep timer has been activated
15. Battery cover
16. Speaker
17. DC 5V: Power input socket
Installation
1. Remove the battery cover on the back of the clock
radio and insert 1 × CR2032 battery (sold separately).
Make sure that the positive terminal of the battery is
facing upwards. The battery is just a back-up. If there
is a power cut the back-up battery will save the time
and alarm settings until the power comes back on.
Note:
The alarm function of the clock radio will not
work if the power supply has been disconnected (such
as in the case of a power cut), the back-up battery
only provides enough power to save the settings in
the memory.
2. Connect the USB cable to the DC power in socket (17)
on the clock radio and to an available USB power
supply/charger.
