6
7
English
Setting the time
1. Hold in [ SET ] for approx. 3 seconds. The hour setting
will start to flash.
2. Press [
▲
] or [
▼
] to change the value.
3. Confirm each stage with [ SET ].
4. Set the following in sequential order:
- Hours
- Minutes
- 24-hour or 12-hour time format
Setting the alarm
• Two separate alarms are available, alarm 1 (AL1) and
alarm 2 (AL2).
• There is a choice of either the radio or a buzzer as
an alarm signal.
1. Hold in [ AL1
∙
2 ] until “Hours” and
start to flash.
2. Press or hold in [
▲
] or [
▼
] to change the value.
3. Confirm each stage with [ AL1∙2 ].
- Set the following in sequential order:
-
Hours
-
Minutes
-
Radio: Selection options:
- “OFF” The buzzer sounds for the alarm
- “ON” The radio sounds for the alarm
- “L + a number”: Set the volume of the alarm
radio. The volume can be adjusted manually when
the radio is playing. Refer to the
Radio
section.
-
Snooze: Set the snooze time. When “OFF”
is shown on the display, the snooze function is
deactivated.
4. “Hours” and
will flash. Alarm 1 is now set, set
alarm 2 or wait 15 seconds to return to normal time
display mode.
