4
E
N
G
LI
S
H
Getting Started
Camera (transmitter)
Power Supply
The camera operates on 4x LR6/AA-batteries (alkaline recommended) or by included
AC/DC adaptor (6 V DC, 400 mA).
Fig. 3
3
2
1
4
Inserting batteries
1. Remove the battery cover on the back of the camera by sliding it downward.
2. Insert 4x AA/LR6 batteries. Make sure to place the batteries according to the
marking in the battery compartment.
3. Replace the battery cover in reverse order.
4. Set the switch in position “ON” to turn on the camera.
Use AC/DC adaptor
1. Connect the included AC/DC adaptor to the connection on the camera
and then to a wall socket.
2. Set the switch to the “ON” position to turn on the camera.
Note
• Never mix old and new batteries. Change all batteries at the same time.
• Remove the batteries if the speakers are not to be used for a long time.
The batteries can start to leak and damage the device.
• Use only the included or recommended AC/DC adaptor.
