E
N
G
LI
S
H
Adjusting the camera
The camera lens can be adjusted up and down
by turning the lens according to the figure.
Fig. 5
Fig. 6
1
2
Fig. 7
Night vision
Set the switch to
“NIGHT” to activate the camera’s night vision.
Fig. 8
Wall mounting of the camera
With the included wall bracket the camera can be
mounted on e.g.a wall.
Note
Always check that the picture works properly before
mounting the camera. Let somebody hold the camera
towards the wall at the same time as you control the
quality of the picture in the receiver. Try moving the
camera if the picture is bad. Also see the chapter
“Troubleshooting”.
1. Mount the wall bracket according to the figure.
Pre-drill and only use the included plugs depending
on the material of the wall.
2. Attach the camera on the wall bracket according to
the figure.
