11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATING THE DIE GRINDERS
1. Slide the throttle locking lever
forward while squeezing the
trigger against the tool body.
• Do not use excess pressure on
the grinding stone as this will
shorten its life.
2. Release the trigger to stop the
grinder.
• The stone will continue to rotate
for a short time after the trigger
has been released.
3. Always ensure the die grinder has stopped before putting it down.
THE RATCHET WRENCH
SETTING THE DIRECTION OF ROTATION
To select the direction of rotation turn
the direction control as follows.
• For loosening bolts/nuts, turn the
direction control clockwise to R
(Reverse) .
• For tightening bolts/nuts, turn
the direction control anti-
clockwise to F (Forward).
FITTING SOCKETS AND USING THE RATCHET WRENCH
1. Select the socket you require and push it onto the square drive shaft.
• It clicks into place when secure.
2. Place the socket over the nut./bolt.
• Take care that the socket is firmly engaged.
WARNING: ALWAYS WAIT UNTIL THE DRIVE SHAFT HAS STOPPED ROTATING
BEFORE SETTING THE DIRECTION CONTROL.
Summary of Contents for X-PRO CAT208
Page 24: ......
