background image

Thank you for purchasing your CLARKE, Variable Speed, Reversible Head, Wood
Lathe.
Before attempting to operate this machine, please read this instruction manual
thoroughly, and follow all directions carefully. By doing so you will ensure the safety
of both yourself andthat of others around you, and at the same time, you should
look forward to long and trouble free service from your Wood lathe.

3

GUARANTEE

TABLE OF CONTENTS

PAGE

General Safety Precautions ...................................................................... 4

Additional Safety Rules for Wood Lathes ................................................ 5

Electrical Connections .............................................................................. 7

Assembly ..................................................................................................... 8

Preparation for Use .................................................................................. 10

Speed Selection ....................................................................................... 13

Starting Procedure ................................................................................... 14

Maintenance ............................................................................................ 14

Parts List and Diagram ....................................................................... 16-17

Specifications ........................................................................................... 19

This product is guaranteed against faults in manufacture for 12 months
from date of purchase. Please keep your receipt as proof of purchase.

This guarantee is invalid if the product has been found to have been
abused or tampered with in any way, or not used for the purpose for which
it was intended. The reason for return must be clearly stated.

This guarantee does not affect your statutory rights.

18

Summary of Contents for Woodworker CWL-20RV











Reviews: