16
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MITRE GAUGE
1. Insert the guide bar into one end
of the groove on the table.
2. Loosen the handle by twisting it
counterclockwise.
3. Rotate the gauge until the arrow
points to the angle on the scale
you want.
4. Retighten the handle.
NOTE:
If required you can remove
the fence from the parallel fence assembly and attach it to the mitre
gauge using the 2 locking knobs from the parallel fence.
SETTING BLADE HEIGHT
Turn the blade height adjusting
handle to set the blade to the
required height.
• Anti-clockwise to raise the
blade.
• Clockwise to lower the blade.
SETTING THE BLADE ANGLE
1. Release the bevel lock
2. Turn the bevel adjustment until the
saw blade is at the desired angle.
3. Tighten the bevel lock to lock the
blade at the required angle
shown on the scale.
Summary of Contents for Woodworker CTS14
Page 28: ......
