12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ADJUST THE LEFT HAND SLIDING TABLE
1. The left hand sliding table can
slide back and forth by pushing
the table release inwards to
release and adjusting the table as
required.
FITTING THE BLADE GUARD
1. Mount the blade guard on the
riving knife as shown.
2. Use the securing bolt to secure
the blade guard.
• Do not tighten the blade guard
securing handle too far - the
blade guard must be able to
rise and fall freely.
3. To remove the saw blade guard,
proceed in reverse order.
The guard must always be lowered over the workpiece before you begin to
cut.
WARNING: REMOVE THE PLUG FROM THE MAINS SUPPLY BEFORE
CARRYING OUT ANY ADJUSTMENT, SERVICING OR MAINTENANCE
Summary of Contents for Woodworker CTS14
Page 28: ......
