8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
3. Secure with four screws (arrowed).
FEET
The four feet may be very gently eased into the holes at the base of the
machine. Alternatively, the machine may be mounted on a workbench or a
wooden base, using the four holes in the base as mounting holes. In order to
maintain complete stability when in use, the wooden base should be secured
to a workbench using ‘G’ clamps.
ADJUSTMENTS BEFORE USE
BELT TABLE ADJUSTMENT
1. With the belt correctly tensioned
(See Maintenance), adjust the
Belt Support so that it is square
and bears very lightly on the back
of the Sanding Belt.
2. Ensure the two hex socket head
securing screws (arrowed) are
tight. A hex. socket wrench is
provided.
3. Slacken the Table Locking Lever
and position the table so that a
gap of 1.5 - 2 mm exists between
the slot in the table and the belt, then lightly secure the table using the
locking lever.
1
2
