background image

4

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

12. If the machine should be used outdoors, use only extension cables 

intended for outdoor use and marked accordingly.

13. Avoid accidental starting by making sure the power switch is off before 

plugging in the power cable.

ADDITIONAL PRECAUTIONS FOR BELT & DISC SANDERS

1. ALWAYS wear ear protectors/defenders when using this machine.

2. ALWAYS wear a dust mask when using this machine. Be aware of harmful or 

toxic dust produced when sanding some woods, paint, etc.

3. ALWAYS use the sanding belt support or table to support the workpiece.

4. Always check to ensure that the table, belt support and attachments are 

secure before starting.

5. ALWAYS maintain a clearance of 1.5-2mm between the table and the 

sanding belt or disc.

6. ALWAYS hold the workpiece firmly so that it cannot be pulled from your 

hands.

7. ALWAYS feed the workpiece against the direction of rotation of the disc. i.e 

the LEFT side of the disc.

8. ALWAYS keep the mains cable well away from the machine and ensure an 

adequate electrical supply is close at hand so that the operation is not 
restricted by the length of the cable.

9. ALWAYS use a dust extraction device, properly connected to the dust 

extraction port.

10. ALWAYS ensure that nails or any foreign objects have been removed from a 

workpiece beforehand. Nails etc., will destroy the belt or disc.

11. NEVER allow the ventilation slots in the motor to become blocked.

12.  NEVER

 

sand pieces which cannot be held firmly by hand.

WARNING: USE ONLY FOR SANDING WOOD. DO NOT USE FOR MATERIALS 
CONTAINING ASBESTOS, PAINTED SURFACES OR MATERIALS WHICH EMIT TOXIC 
PARTICLES.

DUST EXTRACTION

The sander is provided with a dust extraction facility. Please note however, 
that this does not preclude the user from wearing a face mask to prevent the 
inhalation of dust particles. 

It is an EEC requirement that a dust extraction facility be provided on power 
tools, however, due to the nature of the sander, some of the dust produced 
will be forced into the surrounding atmosphere and will not be collected.

Summary of Contents for Woodworker CBS1-5

















Reviews: