15
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
PROCEDURE FOR ENGINE STARTING
1. Connect the charger to the battery.
2. Connect the charger to the mains supply.
WBC240 MODELS
1. Check that mains supply switch is
OFF.
2. Set the CHARGE/START switch in
the START position.
3. Set the MIN/BOOST switch in the
MIN position.
4. Connect the cables to the vehicle
battery as for charging.
5. Set the ON/OFF switch to ON.
WBC400 MODELS
1. Set the rotary CHARGE/START
switch in the START position.
2. Connect the cables to the vehicle
battery as for charging.
CAUTION: WE RECOMMEND THAT BEFORE ATTEMPTING TO BOOST START
YOU CHARGE THE BATTERY FOR 10-15 MINUTES. THIS WILL IMPROVE THE
CHANCE OF A FIRST TIME START, PARTICULARLY WITH LARGER ENGINES.
CAUTION: WHEN THE BATTERY IS COMPLETELY FLAT, YOU MUST CHARGE
THE BATTERY BEFORE ATTEMPTING TO START THE ENGINE, OTHERWISE
YOU MAY CAUSE DAMAGE TO THE VEHICLE ELECTRONIC SYSTEM.
Summary of Contents for WBC240
Page 24: ......