4
BEFORE USE
1. Press down on the actuating yoke
in order to remove the packing
block used to position the yoke
during shipping.
2. If the jack has not been recently
used inspect it for oil leaks or any
other sign of damage. If in doubt,
do not use. Should any defects be
apparent, return the jack to your
Clarke dealer.
3. Install the lower operating handle
by loosening the securing bolt
and sliding the handle into the
actuating yoke as far as it will go.
Re-tighten the securing bolt.
4. Add the upper operating handle
which is held to the lower handle
by a spring loaded plunger.
Summary of Contents for Strong-Arm CTJ4000G
Page 8: ...8 COMPONENT PARTS GENERAL ASSEMBLY...
Page 10: ...10 DECLARATION OF CONFORMITY...
Page 11: ...11 OTHER PRODUCTS IN THE CLARKE RANGE...
Page 12: ......