7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
11. Bolt the hydraulic pump into
position on the side of the frame
using the fixing bolts, nuts and
washers.
12. Ensuring that the hydraulic hose
passes through the retaining loop
on the frame, unfasten the
protective hose cap and screw
the hose onto the threaded
connection of the hydraulic
pump.
13. We recommend sealing the
thread with PTFE tape. Take care
not to let any oil escape while
connecting the hose.
14. Insert the bed support pins into
the holes in the frame side
supports at a height of your
choosing. Secure them in position
using the spring clips.
15. Lift the bed frame into position on
the pins.
IMPORTANT: Due to the weight of the
bed, we recommend that you get
assistance from another person.
ADDING A MANDREL SET
A mandrel set (including storage
bracket and pressure plate) is not
supplied with the press but is
available as Clarke part no 7615062.
1. Bolt the mandrel storage bracket
to the side of the frame using the
bolts supplied.
2. Store the mandrels (including the
adaptor) in their positions on the
storage bracket.
Summary of Contents for Strong-Arm CSA20F
Page 20: ......
