5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
IMPORTANT: Due to the weight of the press components, we recommend
that you get assistance during assembly.
IMPORTANT: We strongly recommend that the press be firmly secured to a
firm and level floor using expansion bolts (not supplied). Holes are provided
in the base supports for this purpose.
IMPORTANT: Do not locate your press where it will be open to the elements,
as severe weather conditions will damage the hydraulic parts.
1. With the help of an assistant,
attach the feet to the frame using
the nuts, bolts and washers.
2. Add the stay bars to each side
and bolt into place.
3. Lift the frame assembly upright
and manoeuvre it to its intended
location in the workshop.
4. With the help of an assistant, install
the ram support carriage into the
upper frame section by
assembling the baseplate, the
two axles and the four sprung
locking bolts/springs as shown in
Fig 2.
5. Tighten the locking bolts loosely so
that the carriage can still move to
and fro along the frame.
6. The hydraulic hoses must be
correctly installed within the
frame. Check that both the hoses
pass through the supporting rings
and that the T-connector sits
upright when the connecting
parts are fitted to the supporting
bracket but do not tighten at this
stage.
Summary of Contents for Strong-Arm CSA20F
Page 20: ......
