9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
FITTING THE MANDRELS
If a set of mandrels is available, any
one may be connected to the end
of the ram using the adaptor
supplied.
Alternatively, the basic pressure cap
can be fitted as shown. Secure the
pressure cap by tightening the grub
screw with a suitable hexagonal key.
To install a mandrel, the adaptor must
be fitted instead of the pressure cap.
Secure the adaptor by tightening the
grub screw with a suitable hexagonal
key as previous.
Select your mandrel depending
upon the size of the workpiece
bearing surface.
The mandrel can then be pushed
into the adaptor where the built-in
spring clip will hold it in place.
Store the mandrels in their positions
on the storage bracket when not in
use.
POSITIONING THE BED BLOCKS
The bed blocks can be placed on
the bed with either the flat face or
the V-supports facing upwards.
They are prevented from slipping out
of position by the retaining pins which
drop down within the confines of the
bed side members.
Check all parts are secure and
correctly aligned before using the
press.
Summary of Contents for Strong-Arm CSA20F
Page 20: ......
