background image

Form No. 71280A  1/2009 revised 10/2016 REV F

Ultra Speed

Burnisher

120V & 240V

with NEMA Plug

This book has important information for the use and safe operation of this machine.  Failure to read 
this book prior to operating or attempting any service or maintenance procedure to your Clarke 
machine could result in injury to you or to other personnel; damage to the machine or to other 
property could occur as well.  You must have training in the operation of this machine before using 
it.  If your operator(s) cannot read this manual, have it explained fully before attempting to operate 
this machine.

All directions given in this book are as seen from the operator’s position at the rear of the ma-
chine.

READ THIS BOOK

LEA ESTE MANUAL

LISEZ CE MANUEL

Operator's Manual / Manual del operador / Manuel de l’utilisateur

ACTIVE MODELS: 01540A(US1500DC / 120V), 01550A(US2000DC / 120V)
OBSOLETE MODELS: 01530A(US1500 / 120V), 01531A(US1500 / 240V), 01491B(ROSE WORKHORSE), 
01541A(US1500DC / 240V), 01551A(US2000DC / 240V)

 English (2 - 12)
 Español (14 - 24)
 Français (26 - 36)

ES

EN

FR

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Summary of Contents for ROSE WORKHORSE 01491B













































Reviews: