13
INSERT THE MAINS LEAD
1. Insert the adapter plug into the
socket shown on the right.
2. Insert the mains plug into the
mains power supply and switch
on.
TURNING THE LOG SPLITTER ON/OFF
While operating under extremely low temperature, turn on the log splitter on
15 minutes before use to preheat the hydraulic oil.
1. Lift up the flap on the switch
housing to access the on/off
buttons.
2. Press the ON button ( I ) to turn the
logbuster on.
3. Press the OFF button ( 0 ) to turn
the logbuster off.
4. In an emergency, press the red
button on the outside of the
switch housing.
CHECK THE SAFE OPERATION OF THE LOG SPLITTER
1. Lower both control levers.
• Splitting wedge will begin to lower.
2. Release either of the levers.
• Splitting wedge should remain in position.
3. Release both levers.
• The ram should rise to its original position.