5
USAGE AND CARE
1.
Do not force the log splitter.
It will do the job better and safer at the rate for which it was
designed.
2.
Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing the log splitter.
Such preventive safety measures reduce the risk of
starting the log splitter accidentally.
3.
Storethe log splitter out of the reach of children and do not allow persons unfamiliar with
log splitters or these instructions to operate the log splitter.
Log splitters are dangerous in
the hands of untrained users.
4.
Maintain the log splitter. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the log splitters operation. If damaged,
have the log splitter repaired before use.
Many accidents are caused by poorly
maintained power tools.
5.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
SERVICE
1.
Have your power tool serviced by a qualified repair person using only identical
replacement parts
. This will ensure that the safety of the power tool is maintained.
ADDITIONAL SAFETY RULES FOR LOG SPLITTERS
Extra special care is required when using this powerful tool to safeguard yourself and
that of others around y
ou.
1.
Never tamper with the log splitter or attempt to operate the machine without covers. Do
not allow split logs to accumulate, always clean up as you work, accumulated split logs
and wood chips can create a hazardous work environment.
2.
The operator must operate the machines’ controls with both hands without using other
makeshift systems, i.e. wedging control levers down etc.
3.
The machine must only be used by one operator. The machine must be used by adults
only.
4.
Check that the logs being split are free from nails or wire, which may fly up or damage the
machine. The ends of the logs must be cut square. Branches must be cut off flush with the
trunk.
5.
Never attempt to split two logs at once; one may be ejected with possibly serious
damage.
6.
Split wood in the direction of the grain. Do not attempt to split a piece of wood across the
grain as this could damage the machine.
7.
Do not attempt to load the log in to the machine whilst the log splitter is in motion.
8.
Keep your hands well away from any splits and cracks which open in the log.
9.
Never leave the machine unattended while it is running. If you leave the machine, even
for a short time, disconnect it from the power supply.
10. Never use the machine whilst under the influence of alcohol, drugs, medicines, or when
you are tired. A clear mind is essential for safety.
11. Always disconnect the power cable when not in use, when carrying out maintenance
work or when moving the machine.
