background image

3

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

GENERAL SAFETY RULES

1. Always ensure when jump-starting that air can circulate freely around the 

jumpstart.

2. Never allow the negative and positive leads on this unit to touch each 

other or to touch the same metal object.

3. Although the jump-start is water resistant and may be used outdoors, DO 

NOT leave it exposed to the elements. Avoid direct sunlight, direct heat, 
rain/moisture etc.

4. This jump-start is designed for use with 12V or 24V electrical systems.

5. Do not operate the jump-start if any of the cables are damaged. Consult 

your Clarke dealer for repair or replacement.

6. Do not operate the jump-start if the case is damaged. Consult your Clarke 

dealer or a qualified person for inspection and repair.

7. Ensure the vehicle battery posts and battery clamps are perfectly clean 

before use.

8. When connecting the jump-start leads to a battery, ensure the ON/OFF 

switch is OFF, and ALWAYS connect the RED, (po’) output conductor 
to the UNEARTHED (+) battery terminal FIRST, then connect the BLACK, 
(negative) conductor to a suitable earthing point on the chassis, well away 
from any fuel lines.

9. Always wear suitable protective clothing and eye protection when working 

with lead-acid batteries.

10. The jump-start is NOT designed to be used as a replacement for the vehicle 

battery.

11. DO NOT attempt to BOOST CHARGE the jump-start's sealed battery.

12. Never allow the cables to become wrapped around the operator or any 

other person.

13. Never attempt any repairs yourself. If you have a problem with the jump-

start contact your local Clarke dealer.

14. Always keep your body and clothing dry. Never work in damp area without 

adequate insulation against electric shock.

15. Never jump-start the engine whilst the jump-start is being charged.

16. Always store the jump-starter out of reach of children.

17. If splashed by battery acid, immediately flush the area of the splash with 

clean water. If a burning sensation is felt or any blistering occurs, seek 
medical help.

Summary of Contents for JS1224Li

















Reviews: