10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9. Connect the black negative (-) clamp to the negative (-) battery terminal
or to a suitable earthing point on the vehicle chassis ensuring the
connections are firm and secure.
10. When the correct connection has been made, the screen will show either
“12V JUMP START READY'” or “24V JUMP START READY”and the battery level.
11. Crank the engine.
12. If the vehicle does not start after 5 to 8 seconds, stop, then wait a minute
before trying again.
13. Once the engine is running, disconnect the earthed clamp FIRST i.e. that
connected to the chassis or Negative terminal etc, and return it to its
storage position, then disconnect the Positive clamp from the battery
terminal, and restore to its storage position. OK
14. Recharge the jump starter after use.
• If the battery is allowed to remain in a discharged state, its life may
be shortened.
• Regularly check the charge level of the battery by pressing the
Power button on the front panel.
WARNING: IT IS POSSIBLE THAT SOME ELECTRONIC EQUIPMENT COULD BE
DAMAGED BY JUMP STARTING. ALWAYS CHECK WITH THE CAR
MANUFACTURER’S HANDBOOK TO DETERMINE WHAT PRECAUTIONS IF
ANY SHOULD BE TAKEN.
Summary of Contents for JS1224Li
Page 16: ......
