15
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MAINTENANCE AND SERVICING
• All repairs and maintenance operations must be carried out by
authorised personnel.
• All maintenance operations must be carried out keeping the pressure
washer on an even floor.
• The pressure washer must be disconnected from the power and water
supplies.
• Correct use and maintenance is necessary to guarantee the pressure
washer's reliability and best performance.
• The pressure washer needs constant checks that are to be carried out
according to the following time schedules:
DAILY (BEFORE EACH USE)
CHECK THE OIL LEVEL OF THE PUMP
See “Check oil” on page 8.
EVERY 2 WEEKS OR AFTER 50 HOURS WORKING
CLEAN THE WATER FILTER
1. Remove the inlet fitting (3)
2. Clean the water filter (2) located
in the water inlet (1).
REPLACING THE FUEL FILTER.
1. Remove the cover from the
pressure washer.
2. Check the filter.
• If dirty, replace it with a new
filter.
HLS160 3 Phase hot wash.fm Page 15 Wednesday, September 28, 2011 12:28 PM
Summary of Contents for HLS160
Page 24: ......
