8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
UNPACKING AND ASSEMBLY
Unpack your generator and check to ensure the following items are present.
Should there be any deficiency or damage caused during transit contact
your Clarke dealer immediately.
FITTING THE HANDLES
1. Secure each handle using four
bolts and washers supplied.
NOTE:
These handles are for moving
the generator on it’s wheels,
not for lifting the generator.
FITTING THE EXHAUST OUTLET
1. Slide the exhaust deflector into
position as shown.
2. Tighten the screw and nut to secure
in place.
• Do not overtighten.
1 x 5 kW Dual Voltage Diesel Generator
2 x Handles c/w fixings
1 x 32 Amp IEC 60309-2 Plug, Blue (230 V)
1 x Lead/Acid Battery (installed)
1 x 16 Amp IEC 60309-2 Plug, Yellow (115 V)
1 x 12 Volt Battery Charging Cable
1 x 32 Amp IEC 60309-2 Plug, Yellow (115 V)
1 x Filler Tube (for engine oil)
1 x 5 mm Hexagon key
2 x Ignition Key
1 x Double open-ended Spanner; 10/12 mm
1 x Cabinet Lid lock Key
